LUMINELL SL1 Скачать руководство пользователя

Страница: 60 / 72

9 FIRMWARE UPDATE

LUMINELL SWEDEN AB

3. Run the Firmware tool from the computer, shortcuts will be available on the desktop

and in windows start menu.

4. The Luminell firmware tool looks like below and contains the following information and

functions:

5. Version numbering structure is as follows:

After scanning, available

searchlights and panels

will be found and added

to the list.

The checked blue box

shows that the version in

this device can be

updated with a new.

It is not possible to alter

this selection.

Note: Searchlights and

panels must be powered

to be detected by the

tool. The update should

not be performed while

the searchlight is in use.

Versions available
in this release.

Short description over
main changes in this
release.

Scan the network for

devices.

Update all devices in the

list that have older

versions.

For this example, we can see that calendar week 26 had several
releases but only v1.2 reached the market. Next release could
have a lower version number but counts up on year and weeks.

Note: Our devices cannot be downgraded.

Содержание SL1









































































Результаты поиска

Содержание SL1

Отзывы:

Похожие инструкции для SL1

Бренды по названию

Популярные бренды

LUMINELL SL1, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SL1

Отзывы:

Похожие инструкции для SL1

Бренды по названию

Популярные бренды