background image

Table of Contents

2

  

U.L. Model No.: CF130

Safety Instructions

READ AND SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRICAL 

SHOCK, OR INJURY TO PERSONS, OBSERVE THE 

FOLLOWING:

a. Use this unit only in a manner intended by the 

manufacturer.  If you have questions, contact the 

manufacturer.

b.  Before servicing or cleaning unit, switch power off at 

service panel and lock service panel disconnecting 

means to prevent power from being switched on 

accidentally. When the service disconnecting means 

cannot be locked, securely fasten a warning device, 

such as a tag, to the service panel.

 

WARNING

!

Additional Safety Instructions for Installation

1. To avoid possible shock, be sure electricity is turned 

off at the main fuse box or circuit breaker panel before 

wiring, and do not operate fan without blades.

2. All wiring must be in accordance with the National 

Electrical Code “ANSI/NFPA 70-2017” and Local 

Electrical Codes. Use the National Electrical Code 

if Local Codes do not exist. The ceiling fan must be 

grounded as a precaution against possible electrical 

shock. Electrical installation should be made or 

approved by a licensed electrician.

3. The outlet box and joist must be securely mounted 

and capable of reliably supporting at least 50 pounds. 

Use only U.L. outlet boxes listed as “Acceptable for 

Fan Support of 22.7 kg. (50 lbs.) or less”, and use 

the mounting screws provided with the outlet box. 

Most outlet boxes commonly used for support of light 

fixtures are not acceptable for fan support and may 

need to be replaced. Consult a qualified electrician if 

in doubt.

4. The downrod furnished with the fan provides the 

minimum recommended floor to fan blade clearance 

for an 8 foot ceiling.

5. Follow the recommended instructions for the proper 

method of wiring your ceiling fan. If you do not know 

enough about electrical wiring, have your fan installed 

by a licensed electrician.

NOTE: 

This fan is suitable for use with solid-state speed 

controls.

NOTE: 

All set screws must be checked and re-tightened 

where necessary before installation.

1. Read your owner’s manual carefully and keep it for 

future reference.

2. Be careful of the fan and blades when cleaning, 

painting, or working near the fan. Always turn off the 

power to the ceiling fan before servicing.

3.  Do not put anything into the fan blades while they are 

turning.

4. Do not operate reversing switch until fan blades have 

come to a complete stop.

To reduce the risk of electrical shock, this fan must be 

installed with an isolating wall control/switch.

To reduce the risk of fire or electrical shock, this fan 

should only be used with fan speed control, Model No. 

SW46W, manufactured by Rhine Electric Co., Ltd.

This product is designed to use only those parts 

supplied with this product and/or any accessories 

designated specifically for use with this product 

by Luminance Brands. Substitution of parts or 

accessories not designated for use with this product 

by Luminance Brands could result in personal injury 

or property damage.

To reduce the risk of personal injury, do not bend 

the blades during installation, balancing the blades 

or cleaning the fan. Do not insert foreign objects in 

between rotating fan blades.

 

WARNING

!

To reduce the risk of injury, install the fan so that the 

blades are at least 7 ft. (2.1m) above the floor.

 

CAUTION

!

Section Page

Safety Instructions    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2

1 . Unpacking Instructions    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3-4

2 . Electrical Requirements    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

3 . Ceiling Fan Assembly   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5-8

4 . How to Hang Your Ceiling Fan   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .9-10

5 . How to Wire Your Ceiling Fan     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11

6 . Final Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12

S

ection Page

7 . Installing the Wall Control   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .13-14

8 . Maintenance   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

9 . Accessories     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

10 . Using Your Ceiling Fan   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

11 . Repair Parts    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .16-17

12 . Troubleshooting    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18

Ceiling Fan Limited Warranty    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19

Содержание Kathy Ireland Home TILO CF130BS00





















Отзывы: