3. Ceiling Fan Assembly
5
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF130
M5 x 14mm FLANGE HEAD BLADE
SCREWS (2 per blade)
FAN BLADE SLOT
SLIDE FAN BLADE
INTO BLADE
CENTER SLOT
FAN BLADE
FAN
HOUSING
NOTCHED SWITCH ASSEMBLY
Figure 1
SWITCH HOUSING
CONNECTOR
MOTOR
CONNECTOR
SWITCH HOUSING
COVER
REMOVE M4 x 8mm
FLAT HEAD SCREWS (3)
Figure 2
SWITCH HOUSING
ASSEMBLY
REINSTALL M4 x 8mm FLAT
HEAD SCREWS (3)
Figure 3
3.1
Position the fan motor assembly upside down in
preparation for mounting the three fan blades .
Rotate the notched switch assembly to expose the
holes for blade assembly (Figure 1) .
Slide blade through blade slot in blade housing
assembly . Mount blade to fan housing using two M5 x
14mm flange head blade screws (Figure 1) .
NOTE: Take care not to scratch fan housing
assembly when installing blades.
Complete the remaining two blades installation per the
above instructions .
Remove the three M4 x 8mm flat head screws from
the switch housing adapter plate (Figure 2) . Retain the
screws for future installation .
Engage the connector of the switch housing assembly
with the motor connector (Figure 2) . The two connectors
are keyed and color-coded and must be mated correctly
(color-to-color) before they can be engaged . Make sure
the connector latch closes properly .
Position the switch housing assembly on the switch
housing plate and align the holes in the switch housing
assembly with the holes in the plate . Secure the switch
housing assembly by installing the three previously
removed M4 x 8mm flat head screws (Figure 3) .
To avoid possible fire or shock, do not pinch wires
between the switch housing assembly and the bracket
switch housing assembly.
WARNING
!
