7
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF542 & CF552
3. Ceiling Fan Assembly
(continued)
ROTATE SWITCH HOUSING ASSEMBLY
BRACKET CLOCKWISE TO ENGAGE
TWO KEYHOLE SCREWS
REINSTALL & TIGHTEN ONE
M4 x 10mm SERRATED PAN
HEAD SCREW
TIGHTEN TWO
M4 x 10mm
SERRATED
PAN HEAD
SCREWS
SWITCH HOUSING
ASSEMBLY BRACKET
Figure 6
3.6
Position the Switch Housing Assembly Bracket on the
Adapter Plate so that the Two Screws mate with the
Two Switch Housing Assembly Bracket Keyhole Slots
with Rubber Cover .
Turn the Switch Housing Assembly Bracket Clockwise
and tighten both M4 x 10mm Serrated Pan Head
Screws (Figure 6) .
Reinstall the previously removed M4 x 10mm Serrated
Pan Head Screw in the remaining Switch Housing
Assembly Bracket Hole .
A spare M4 x 10mm Serrated Pan Head Screw is
provided in parts bag, if needed .
SWITCH HOUSING
ASSEMBLY
MOTOR CONNECTOR
SWITCH HOUSING
ASSEMBLY CONNECTOR
BLUE AND WHITE
WIRES AND
CONNECTORS
Figure 7
3.7
Engage the Switch Housing Assembly Connector with
the Motor Connector (Figure 7) .
The Two Connectors are Keyed and Color-Coded and
must be mated correctly (color-to-color) before they can
be engaged .
Make sure the Connector Latch closes properly .
If an accessory light kit is not being used, verify that
the wire connectors on the white and blue wire wire in
the switch housing assembly are present and tight.
WARNING
!
