11
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF542 & CF552
RETIGHTEN TWO
PHILLIPS HEAD
SET SCREWS
MOTOR
COUPLER
3.15
While pulling up on the 4 .5” Downrod, retighten the Two
Set Screws (previously loosened) in the Motor Coupler
to secure the Downrod into place (Figure 15) .
NOTE: The set screws must be properly installed as
described above, or fan wobble could result.
Figure 15
3. Ceiling Fan Assembly
(continued)
GROMMET
DOWNROD
COUPLER
COVER
Figure 16
3.16
Make sure the Grommet is properly installed in the
Motor Coupler Cover then slide the Motor Coupler
Cover on the Downrod until it rests on the Motor
Housing .
Be sure the Motor Coupler Cover is oriented correctly
(Figure 16) .
CEILING
COVER
DOWNROD
Figure 17
3.17
Place the Ceiling Cover over the Downrod .
Be sure the Ceiling Cover is oriented correctly
(Figure 17) .
It is critical that the set screws in the motor coupler are
properly installed and securely tightened. Failure to
verify that the set screws are properly installed could
result in the fan falling.
WARNING
!
