English
-
24
7
The data in the USB
disk cannot be read
1. The supported format of the disk is exFAT. It is
recommended to use DC200 to format the disk
before it is used.
2. The USB disk with the capacity of 4 G and
above is recommended (up to 256 G supported)
3. Please make sure the file was saved at the
specified path: \DCIM\100MEDIA. (E.g.:
J:\DCIM\100MEDIA)
4. Please make sure the file is named
appropriately, e.g. four English l four
numbers. (E.g.: LUMN0001.JPG)
8
Fail to store images
or react
1. Check to see if the stored data have reached the
maximum size of the USB disk (priority) or
internal memory.
2. Please make sure if the capture function is set to
continuous mode or the time for capture is set to
be long.
9
The output image is
too bright, too dark,
or vague
Press [AUTO TUNE] button to automatically adjust
the image to have the best brightness and focusing
performance.
10
Unable to record
images
1. Check to see if the stored data have reached the
maximum size of the USB disk.
2. The recording function is not supported in the
internal memory. Please make sure that USB
disk is inserted for image recording.
11
The operating steps
in the manual are
not applicable to the
machine
The operating steps in the manual may be not
applicable to the machine due to improvement in
functions. Check to see if the Firmware version of
your machine is up-to-date.
Please go to Lumens official website to check
whether the latest version is available for update.
https://www.mylumens.com/support
12
How to unlock the
locked device
Press [MENU] to access the setting menu
[Settings]
[Advanced Settings]
[Lock Down]
select [OFF] to disable the lock down function when
the power is On.
