5
ENG
●
Remove the protective film from the plexiglass!
●
Place the led lighting system with pre-assembled legs on the edges of the aquarium and adjust the legs so that they
fit perfectly on both sides of the aquarium.
●
In case you opt for the hanging type of mounting of our LED console above your aquarium, the package includes a
set of cables for this type of mounting. With this set of cables, it is possible to quickly and easily adjust the height and
inclination of the LED console.
Installation:
NOTE: Installation may only be performed by a qualified person who understands the installation procedure described
in this manual. When drilling screw holes, make sure that there is no live mains cable under the surface you are
drilling! Always use suitable dowels and screws suitable for the ceiling / wall on which the cable set is mounted.
Make sure that the ceiling / wall can withstand the full load of the LED console.
1. Mounting of bracket on the body of the LED console
It is necessary to fix the four sliding brackets (10) on the body of the LED console (11) as in the picture.
Pass the cable (7) through the cap of the bracket (8) so that the end of the cable that has a thickening (9) remains in
the cap. The other end of the cable is passed through the cable fixing part (5).
