8
ENG
●
Connect the power cord to the AC power connector and make sure it is connected properly.
●
Plug the timer into a wall outlet and set it to "OFF", then plug the led lighting system plug into the timer.
If the led lighting system has a built-in controller, no special timer is required for led lighting system.
●
After connecting all connections, switch the timer from “OFF” mode to “AUTO” or “ON” mode.
●
When installing the led lighting system, make sure that all parts / components of the led lighting system work
according to the given instructions
●
After 15 minutes of operation, disconnect the led lighting system from power supply and check that all parts /
components have not accidentally overheated (> + 80 ° C) and that the area around the LED chips has not been
physically changed. In case of overheating or malfunction, do not use led lighting system, but contact the dealer or
manufacturer as soon as possible!
