2
ENG
Safety instructions and usage of led lighting system
Please adhere to the following:
●
The led lighting system is only installed when it’s not connected to the power source
(the cable is not in power connector)!
●
The led lighting system does not contain serviceable parts. Do not disassemble the led lighting system by
yourself! Repairs of device may only be performed by the manufacturer, otherwise the warranty will not be valid.
●
The LED console does not contain replaceable LED modules!
●
Do not look directly into the emitting light of led lighting system!
●
Use the power supply only at the specified mains voltage (110 or 230V)!
●
The led lighting system is intended for indoor use only. It must not be used under water and in places that are
not protected from direct spraying of water and moisture!
●
Do not use it on terrariums, because the emitting light of led lighting system is not suitable for reptiles or
amphibians!
●
Do not use led lighting system near flammable materials!
●
Do not remove the lighting cover or any part of it.
●
If the led lighting system or any part of it is damaged, unplug it and stop using it immediately.
Contact us as soon as possible!
●
Handle this product with care and use it only according to the enclosed instructions!
Protect it from bumps, shakes and falls, otherwise physical damage or malfunction may occur!
●
The led lighting system can only be cleaned when it’s not connected to the power source
(the cable is not in power connector)! Do not use aggressive cleaning chemicals! Remove dust with a slightly
damp cloth or alcohol-based products.
●
When performing regular aquarium maintenance, it is recommended to move or push the led lighting system in
a place where the led lighting system is stable, thus avoiding the possibility of the led lighting system falling into
the aquarium or falling to the floor!
If the led lighting system is hanging type, check the parts or components used for hanging led lighting systems, to
make sure that the led lighting system is properly secured against unwanted falls.
●
Due to the heat energy that is released during the operation of the led lighting system, do not use the led
lighting system in covered aquariums, ie. their hoods, for safety and functional reasons (overheating and failure)!
Cooling of led lighting system must be provided continuously. Large fumes can cause moisture to condense
inside the led lighting system, causing damage to electrical components and the risk of a short circuit failure.
●
Do not cover the led lighting system and do not use it as a shelf for storing fish food or chemichals for the
aquarium. Objects placed on the led lighting system can reduce the area for releasing of heat energy into the
space (cooling), and can cause overheating and failure.
●
Do not store aquarium tools, chemichals, fish food, etc. on the led lighting system. Plants fertilizers and other
liquids placed on the lighting can leak, which can cause damage to the anodized surface, and thus degrade the
level of heat release and the aesthetics of the led lighting system it’self. Due to the heat, plant fertilizers and fish
food deteriorating faster.
●
Body of led lighting system is heated during use. The operating temperature must not 80 ºC.
●
Do not use the led lighting system if the light source is defective or damaged
●
If any part of the led lighting system comes into contact with water, immediately disconnect it from the power
supply and remove the water, only after you have made sure that all the water / moisture has been removed you
can connect the led lighting system to the power supply again!
●
Make sure the led lighting system works as intended. In case of an error please do not experiment, do not
hesitate to contact us.
●
Make sure the power sources and connections are properly connected and installed. The installation of
connections and power sources should be planned so that they are not accessible to children and pets.
●
Do not leave a child unattended beside the led lighting system!
●
In moment of purchasing of our led lighting system, please check the condition of the led lighting system. If you
find that there is any damage to the led lighting system it’self, please notify the store where you purchased the led
lighting system immediately. Do not use faulty led lighting systems.
The use of led lighting system is not allowed in extreme conditions. Under such conditions are considered:
●
water source directed directly at the lighting (dripping or spraying),
●
too high humidity (> 95%),
●
too high ambient temperature (> + 40 ° C),
●
the presence of large amounts of dust and flammable gases and vapors and solvents
Such or similar circumstances mentioned above are not allowed as they may result in malfunction of the lighting it’self.
In addition, there is a risk of short circuit failure, electric shock, fire, etc.
