LulzBot TAZ 3.0, Руководство пользователя

Страница: 16 / 162

Setup Your Printer
1.1 Hardware Setup
1. Your printer has been calibrated and tested, however, after unpacking
all of the components you will need to re-mount the Y axis onto the
frame and connect the bed and Y axis connectors. You will also
need to re-mount the extruder tool head. Please follow the steps
completely to make certain that the extruder tool head and Y axis
are re-mounted correctly. You will then be on your way to your first
print. Use Fig. 1.1 to see which direction the three axes move, as the
following instructions will reference the X, Y, and Z axes.
Figure 1.1: Axes movement directions
2. Place the TAZ frame and Y axis assembly on a flat and level surface.
Move to the Y axis assembly and find the four Y axis bolts. The four
bolts located on the Y axis aluminum frame bars, have large plastic
knobs that allow the bolts to be easily turned by hand (Fig. 1.2, page
17). Turning counter clock-wise, remove each of the four Y axis bolts
and set aside (Fig. 1.3, page 17).
16