LulzBot TAZ 3.0, Руководство пользователя

Страница: 103 / 162

5.5. EXPERT MODE
support automatically, otherwise the degrees given will be used. Support
generation is a relatively complex topic, and there are several aspects
which determine the optimal support, it is strongly recommended to set the
threshold to zero and allow Slic3r to determine the support required.
Small models, and those with small footprints, can sometimes break or
detach from the bed. Therefore the
Enforce support
option will cause
support structures to be printed for the given number of layers, regardless
of the angle threshold value.
To demonstrate the infill patterns the minimug model was tilted by 45
◦
along the x axis, as shown in figure 5.38.
Figure 5.38: Minimug model, tilted 45
◦
.
As with infill, there are several patterns available for the support
structure.
103