Lukhan LK-B10 Скачать руководство пользователя страница 61

Страница: 61 / 135

Command - Store Graphics

Description

Use this com mand to store PCX graphics files in

mem ory.

Syntax

GM"NAME"p

�

“DATA”

Parameters

“NAME”

= This is the graphic name that will

be used when retrieving the stored

graphic.

•

The name may be up to

8 char ac ters

long.

•

Graphic names stored by the printer are case

sensitive and will be stored ex actly as en tered

with the

com mand line; i.e.

“LOGO1”

“logo1”

and

“LoGo1”

are three different

graphics when stored into the printer or when

retrieved by the user.

= This is the file size in bytes. Use the DOS

DIR command to determine the ex act

file size.

“DATA”

= Graphic data in 1-bit (black &

white) PCX (bi nary data) for mat file.

�

A graphic will not store if suf ficient mem ory is

not al located to graphic mem ory. See the

command for de tails on ad justing and con fig-

uring mem ory to store graphics (forms and

soft fonts).

�

Verify the proper storage of the graphic with

the

com mand.

3-60

980352-001 Rev.D

Содержание LK-B10








































































































































Результаты поиска

Содержание LK-B10

Отзывы:

Бренды по названию

Популярные бренды

Lukhan LK-B10, Руководство по управлению

Результаты поиска

Содержание LK-B10

Отзывы:

Бренды по названию

Популярные бренды