Lukhan LK-B10 Скачать руководство пользователя страница 54

Страница: 54 / 135

Command - Delete Form

Description

This com mand is used to de lete forms from

mem ory.

Syntax

[

“FORMNAME”

“*”

]

Parameters

“FORMNAME”

= By en tering the name of a

form, that form will be de leted from

mem ory.

•

The name may be up to

8 char ac ters

long.

•

Form names stored by the printer are case

sensitive and will be stored ex actly as en tered

on the

com mand line; i.e.

“FORM1”

“form1”

and

“FoRm1”

are three different

forms when stored into the printer or when re -

trieved by the user.

•

Deleting a sin gle form re quires the

FK”FORMNAME”

be is sued twice for each

form to be de leted. Some la bel gen eration

programs re-is sue forms (form de lete and

store) every time a la bel is printed which re -

duces flash mem ory life.

“*”

= By in cluding an “*” (wild card), ALL

forms will be de leted from mem ory. The

FK”*”

does not need to be is sued twice

to de lete all forms.

Example

FK"AFORM"

�

:deletes form “AFORM”

FK"AFORM"

�

:second de lete form “AFORM” re quired

:for flash printers

FK"*"

�

:deletes all forms

980352-001 Rev.D

3-53

Содержание LK-B10








































































































































Результаты поиска

Содержание LK-B10

Отзывы:

Бренды по названию

Популярные бренды

Lukhan LK-B10, Руководство по управлению

Результаты поиска

Содержание LK-B10

Отзывы:

Бренды по названию

Популярные бренды