Lukhan LK-B10 Скачать руководство пользователя страница 56

Страница: 56 / 135

Command - Store Form

Description

This com mand be gins a form store se quence.

Syntax

FS"FORMNAME"

Parameters

“FORMNAME”

=This is the form name that

will be used when re trieving the stored

form.

•

The name may be up to

8 char ac ters

long.

•

Form names stored by the printer are case

sensitive and will be stored ex actly as en tered

on the

com mand line; i.e.

“FORM1”

“form1”

and

“FoRm1”

are three different

forms when stored into the printer or when re -

trieved by the user.

•

Global commands such as

EI, EK, ES, FI,

FK, GI, GK, GM, M, N, P, TS, U, UE, UF,

UG, Y, W, ?, ^@

should not be used in a

form store se quence.

Form name,

AUTOFR

, is re served for automatic,

single form re call, see page 3-9 for de tails.

�

All com mands fol low ing

will be stored in

form mem ory un til the

com mand is re -

ceived, end ing the form store process.

�

Delete a form prior to up dating the form by

us ing the

command. If a form (with the

same name) is already stored in memory, is -

su ing the

com mand will re sult in an er ror

and the pre viously stored form is re tained.

�

To print a list of the forms currently stored in

memory, use the

com mand.

�

Data stored within a form can not have the

Null (0 dec. 00 hex.) char acter as part of any

data within that form.

�

A form will not store if insuf ficient memory is

available. See the

com mand for de tails on

ad just ing and con fig ur ing mem ory for forms,

graphics and soft fonts.

980352-001 Rev.D

3-55

Содержание LK-B10








































































































































Результаты поиска

Содержание LK-B10

Отзывы:

Бренды по названию

Популярные бренды

Lukhan LK-B10, Руководство по управлению

Результаты поиска

Содержание LK-B10

Отзывы:

Бренды по названию

Популярные бренды