30
G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany
9.3
Configuration
After generating an OPUS20 device from an app, it can be configured. In the
“Info” tab there
the firmware information of the connected OPUS20 measuring instrument is shown. To
configure the
OPUS20 device, go to the “Configuration” tab.
The configuration parameters are:
name (short)
Name of the device for display in the device list.
name (long)
A longer name for the device.
description
Notes for the device configuration, location and other
information, e.g. measuring tasks involved
device active
Switches on or off the value acquisition inside the lufft I-BOX
measurement interval
Interval between subsequent measurement value
acquisitions
IP-configuration
IP-address of the connected OPUS20 device
channels
List of all channels with active value acquisition
Fig. 16: Screenshot OPUS20 Device Information tab
Within the sub-
tab “channels” the channels can be configured. The button “get channels”
requests and displays the channel list (internal channels and channels of external sensors
connected) from the OPUS20 mesuring instruments. If there were already configured active
channels, they are displayed with checked a checkbox. Using the checkboxes the channel
list in the Lufft I-BOX can be modified.
For each channel a name can be specified by clicking on the value displayed in the “Caption”
columns.
