PARTNER Voice Messaging Installation and Programming
Assigning Group Call Distribution (#206) - Option 1
30
Assigning Group Call Distribution (#206) -
Option 1
Use this procedure to specify the outside lines on which Automated Attendant Service is required.
To assign VMS-AA lines specified on the System Configuration Form, Page 1, Line Coverage, to
Hunt Group 7:
1.
Press
#206
.
2.
At the group prompt, press
7
.
3.
At the extension prompt, enter the first VMS-AA line specified in the Line Coverage column of the
System Configuration Form, Page 1.
4.
Press
D
until the display reads 1 Assigned.
5.
To program another line, press
n
or
p
until the appropriate line number displays.
6.
Press
D
until the display reads 1 Assigned.
7.
Repeat Steps 5 and 6 for each VMS-AA line on the System Configuration Form.
Assigning Line Coverage for Extension
Numbers (#208)
To assign line coverage for the extension numbers specified in the VMS-Mail column on the
System Configuration Form, Page 1, Line Coverage:
1.
Press
#208
.
2.
At the
Line:
prompt, enter the first line for which an extension is specified in the VMS-Mail
column of the System Configuration Form, Page 1, Line Coverage.
3.
At the
Data:
prompt, enter the number of the extension specified in the VMS-Mail column.
4.
To program another line, press
n
or
p
until the appropriate line number displays.
5.
Repeat Steps 3 and 4 for each VMS-Mail line for which an extension number is written on the
System Configuration Form.
Programming Music On Hold (#602)
If desired, program Music On Hold. See the documentation for the communications system for
instructions.
