Lucent Technologies PacketStar PSAX Скачать руководство пользователя страница 96 | Manualshive

Страница: 96 / 405

Lucent Technologies PacketStar PSAX Скачать руководство пользователя страница 96

255-700-243

4-23

PacketStar

®

PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide

, Issue 1

Release 8.0

Chapter 4 Configuring the Interfaces Using the Console Interface

Managing ATM PNNI Interfaces

[Aggregate Token]
(display only)

Default:

0

Range:
0–2147483647
Format: cps

Indicates the interface aggregate token, whose
links to a given neighbor node are to be aggre-
gated and advertised as a single node link. For
example, if there are 3 physical links between
two chassis, the user can set the aggregation
token to the same value on each interface (both
sides). This makes the aggregated links appear to
the rest of the network as one logical link.

[Traffic Descriptor]
(display only)

Default:

0

Range: N/A

Format: Predefined

This field is not currently supported.

Displays the traffic descriptor index,an entry in
the atmTrafficDescrParamTable defined in

RFC

1695

that specifies the traffic allocation for the

PNNI routing control channel (VCI=18) on this
interface.

VP Capability

Default:

True

Range: N/A

Format: Predefined

Indicates whether the interface is capable of hav-
ing virtual path connections (VPCs) established
within it.

True

The interface is capable of having VPCs estab-
lished within it.

False

The interface cannot have VPCs established
within it.

[Service Category]
(display only)

Default:

NrtVbr

Range: N/A
Format: Predefined

Indicates a quality of service class type. The speed
and quality of transmission depends on the class-
choice made. The higher the class, the higher the
guarantee that the packets will get to their desti-
nation on time. Cbr is the highest class, and Ubr
is the lowest.

NrtVbr

Non-realtime variable bit rate service.

Cbr

Constant bit rate service.

RtVbr

Real-time variable bit rate service.

Abr

Available bit rate service.

Ubr

Unspecified bit rate service.

[Admin Status]
(display only)

Default:

OutOfService

Range: N/A
Format: Predefined

Indicates whether the interface is configurable to
carry connections or not.

OutOfService

Indicates that some condition is preventing the
port from being configured with an interface.

InService

Indicates that no conditions are preventing the
port from being fully operational.

Table 4-5. Field Descriptions for the ATM PNNI Interface Configuration Window

Field Name

Field Values

Description

«
...
94
95
96
97
98
...
»

Содержание PacketStar PSAX






















































































































































































































































































































































































































Отзывы:

Нет отзывов