Lucent Technologies PacketStar PSAX, Руководство пользователя, Страница: 76 / 405

255-700-243 4-3
PacketStar
®
PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide , Issue 1 Release 8.0
Chapter 4 Configuring the Interfaces Using the Console Interface
Managing ATM IISP User and Network Interfaces
dard, pending completion of PNNI, Phase 1. Building on ATM UNI 3.0 and
3.1, it uses static routing tables established by the network administrator to
route connections around link failures.
Each connection using the IISP interface is configurable as either the user
side or the network side. See the Field Description Table following the ATM
IISP Interface Configuration window for VPI and VCI connection limits.
This section provides instructions for managing interfaces by performing the
following tasks:
• Configuring and applying interface(s)
• Bringing interface(s) into service
•
Taking interface(s) out of service
• Viewing interface(s)
•
Deleting interface(s)
• Viewing interface statistics
Configuring and Viewing the ATM IISP Interfaces
Begin
At the conclusion of the module port and channel configuration proce-
dure, you accessed the ATM IISP Interface Configuration window (see
Figure 4-1).
1 Select the values for the fields on the window in Figure 4-1 from the val-
ues given in Table 4-1. Table 1-1 describes the commands on the win-
dow.
2 To apply the interface values you selected, select the Apply interface
Configuration command.
3 If your configuration requires you to bring the interface into service at
this time, do so by selecting the
Bring Interface Into Service com-
mand. For more information on other configuration windows on which
you can bring interfaces into service, see the “Bringing One or More ATM
IISP Interfaces into Service” procedure in this guide.
Note: The interface must have in-service status so that the PVC and SVC
connections you will set up to use this interface will pass traffic.
End