manualshive.com logo in svg

Lucent Technologies PacketStar PSAX, Руководство пользователя, Страница: 205 / 405

Поделиться
Скачать
Lucent Technologies PacketStar PSAX Скачать руководство пользователя страница 205

Chapter 5  Configuring Ports and Channels Using the AQueView

®

 EMS

Obtaining Module Hardware Information

5-22

255-700-243

 PacketStar

®

 PSAX 12-Port Medium-Density DS1 Multiservice Module User Guide

,  Issue 1

Release 8.0

Table 5-6.   Field Descriptions for the Module Information Window

Field Name

Field Values

Description

Module Type

Default: 

N/A

Range: from PSAX 
system database

Format: Predefined 
alphanumeric alpha-
numeric

Indicates the name of the module in the slot. All 
modules supported by the PSAX systems and the 

AQueView

 system are listed in the section "I/O 

and Server Modules" in this chapter. 

Operational Status

Default: 

Unknown

Range: N/A

Format: Predefined 
alphanumeric 

Displays the operational mode of the module. 

Unknown

Indicates that the module has not been config-
ured.

Primary

For an I/O or server module, indicates  that at 
least one port or channel on the module has been 
configured.
For a CPU module, indicates that this module is 
the primary CPU module.

Standby

Indicates that the module, in redundant systems, 
is operating as the backup module to the primary 
module. 
Indicates for the CPU module, in redundant sys-
tems, that this module is the backup CPU mod-
ule.

Alarm Status

Default: 

No Alarm

Range: N/A

Format: Predefined 
alphanumeric 

Displays the present alarm condition of the mod-
ule. For the alarm status conditions, see the table 
“Alarm Status Descriptions” following these field 
descriptions.For the alarm status conditions, see 
“Obtaining Hardware Operating Status Data for  
Modules” in this chapter. 

Software Version

Default: 

N/A

Range: (from module 
firmware)
Format: Predefined 
alphanumeric 

Displays the version of PSAX system software 
with which the modules’ firmware was released. 
The software version is encoded in the module 
firmware. Because not all modules require firm-
ware upgrades with every new PSAX system soft-
ware release, the software version that is dis-
played in this window may be lower than the 
CPU system software that is currently running on 
the PSAX system. See the most recent 

Release Note

 

document for the latest software and firmware 
lineup information.

Hardware Revision Default: 

N/A

Range: (from module 
firmware)

Format: Predefined 
alphanumeric

Displays the version of the hardware for the 
selected module.

Содержание PacketStar PSAX






















































































































































































































































































































































































































Отзывы:

Нет отзывов