Lucent Technologies PacketStar PSAX 8-Port Voice 2-Wire Station Module Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 100

background image

PacketStar

®

8-Port Voice 2-Wire Station Module User Guide

, Issue 1

Release 8.0.0

255-700-261

iii

Legal Notices, Safety, and Regulatory

Infomation

Copyright

Copyright © 2002 by Lucent Technologies. All rights reserved.

This material is protected by the copyright laws of the United States and
other countries. It may not be reproduced, distributed, or altered in any fash-
ion by any entity (either internal or external to Lucent Technologies), except
in accordance with applicable agreements, contracts or licensing, without the
express written consent of the originating organization and the business
management owner of the material.

This document was prepared by the Information Design and Development
Team of Lucent Technologies, PacketStar PSAX products. Offices are located in
Landover, Maryland, USA.

Trademarks

PacketStar, AQueView, Lucent, Lucent Technologies, and the Lucent Technolo-
gies logo are registered trademarks of Lucent Technologies in the USA. Other
product and brand names mentioned in this guide are trademarks or regis-
tered trademarks of their respective owners.

Notices

The information in this document is for informational use only, is subject to
change without notice, and should not be construed as a commitment by
Lucent Technologies, Inc. This document is without warranty of any kind,
either expressed or implied. Lucent Technologies, Inc. assumes no responsi-
bility for any errors, inaccuracies, or omissions. Neither is any liability
assumed for damages resulting from the use of the information or instruc-
tions contained herein. Lucent Technologies, Inc. is not responsible for any
damage or loss to your data or equipment resulting either directly or indi-
rectly from use of this document.

Warranty Information

Software and Hardware Limited Warranties

Lucent Technologies provides a 90-day limited software warranty, and a one-
year limited hardware warranty on this product. Refer to the Software License
and Limited Warranty Agreement and the Lucent Technologies InterNetworking Sys-
tems Global Warranty that accompanied your package for more information.

«
1
2
3
4
5
...
»

Содержание PacketStar PSAX 8-Port Voice 2-Wire Station Module





































































































Отзывы:

Нет отзывов

Похожие инструкции для PacketStar PSAX 8-Port Voice 2-Wire Station Module

SolarCell Remote

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 20

Бренд: Samson Страницы: 8

Бренд: Samson Страницы: 60

Бренд: Samson Страницы: 40

Бренд: Vega Страницы: 20

Бренд: POLA Страницы: 2

Бренд: Osram Страницы: 3

Бренд: Wenglor Страницы: 44

Бренд: Phoenix Contact Страницы: 56

Бренд: Daikin Страницы: 150

McDonnell & Miller PSE-80 Series

Бренд: Xylem Страницы: 8

Бренд: CAME Страницы: 128

Бренд: HANYOUNG NUX Страницы: 4

Бренд: MT-Propeller Страницы: 16

AWH18QD-D3DNA3G/I

Бренд: AC Pro Страницы: 48

Бренд: CompuSTAR Страницы: 8

Бренд: RC-Timing Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды