Lucent Technologies PacketStar PSAX 8-Port Voice 2-Wire Station Module Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 100

background image

Legal Notices, Safety, and Regulatory Infomation

Safety Warnings and Information

iv

255-700-261

PacketStar

®

8-Port Voice 2-Wire Station Module User Guide

, Issue 1

Release 8.0.0

Warranty Warnings

!

CAUTION:

Modifying or tampering with PSAX chassis components may void your
warranty. Any modification to this equipment not expressly authorized
by Lucent Technologies may void your granted authority to operate such
equipment.

!

CAUTION:

When inserting modules into the chassis, slide them gently, not force-
fully. Excessive force may cause the modules to be seated improperly in
the chassis, and result in possible damage to the module or the chassis.
Install or remove modules one at a time. Doing this aids in preventing
the PSAX system from indicating any erroneous failure messages, and
allows the PSAX system to reinitialize and display the accurate configu-
ration of the module that is inserted

.

!

CAUTION:

Shipping the chassis with removable I/O, server, or CPU modules
installed may cause damage to the chassis and the modules. Damage to
any of the components in the system resulting from shipping the chassis
with removable modules installed will void your warranty. Only Lucent-
authorized personnel should ship the PSAX chassis with a module
installed.

Safety Warnings and Information

When installing and operating the 8-Port Voice 2-Wire Station module, fol-
low the safety guidelines provided in the printed PacketStar

®

PSAX Safety

Guidelines, which accompanies this product, to help prevent serious personal
injury and damage to the 8-Port Voice 2-Wire Station module. Please read all
warnings and instructions supplied before beginning installation or configu-
ration of this module. In addition to the general safety information provided,
you should also refer to the text in the PacketStar PSAX user and installation
guides for other important safety information and procedures.

Regulatory Standards Compliance

Safety and Electromagnetic Compatibility (EMC)

The following PacketStar PSAX systems are compliant with applicable safety
and EMC standards when configured with the 8-Port
Voice 2-Wire Stationmodule (model 20N30):

«
...
2
3
4
5
6
...
»

Содержание PacketStar PSAX 8-Port Voice 2-Wire Station Module





































































































Отзывы:

Нет отзывов

Похожие инструкции для PacketStar PSAX 8-Port Voice 2-Wire Station Module

Бренд: Canon Страницы: 2

Бренд: Raymarine Страницы: 12

Бренд: Jafar Страницы: 13

Бренд: Ebyte Страницы: 34

Бренд: YASKAWA Страницы: 61

Бренд: DAV TECH Страницы: 10

Бренд: BEIER-Electronic Страницы: 22

EtherNetIP ControlPlex CPC12EN

Бренд: E-T-A Страницы: 28

Бренд: olympia electronics Страницы: 10

Бренд: VAT Страницы: 39

Бренд: Samson Страницы: 124

Бренд: Samson Страницы: 86

Бренд: VAC Страницы: 5

Бренд: Keba Страницы: 16

Бренд: KEB Страницы: 16

Бренд: Wang Страницы: 68

Бренд: NAVITAS Страницы: 14

Бренд: Tylo Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды