Mitel SX200D ONS (77135)
C o n f i d e n t i a l
6
The above information is provided by Lucent Technologies as a guide.
See disclaimer on page 1
Lucent Technologies
O c t e l M e s s a g i n g D i v i s i o n
Programming when Enhanced Inband Signaling is not available or customer
does not care to utilize the enhance inband signaling.
Program the dial string for bin 500 as follows:
221*99*6*9
(this will send Octel 50 9 + mailbox number)
Ç
Hunt Group
Access Code
Program the dial string for bin 600 as follows:
221 *98*6*9
(this will send Octel 50 8 + mailbox number)
Ç
Hunt Group
Access Code
Speed dial programmed to allow for immediate recording used to record phone
conversations.
Program the dial string for bin 501 as follows:
221 *97*6*9
(this will send Octel 50 7 + mailbox number)
Ç
Hunt Group
Access Code
Note: See Section 7.5 Record Telephone Conversation.
ENHANCED INBAND SIGNALING DIAL STRINGS
When *4 is in the dial string the Mitel 200D will replace it with the
forward type access and the following reason codes:
Valid index numbers are:
1 - Forward Always
2 - Forward on Busy
3 - Forward No Answer
4 - Forward Busy/No Answer
When *8 is in the dial string the Mitel 200D dials out the ANI digits if the
call originated over a trunk. If ANI digits are not allowed or not available,
then no digits are sent. When the call is internal, the extension’s access
code is dialed out.
Program the dial string for bin 500 as follows:
221*9*4*6*8*9
Ç
Hunt Group
Access Code
This will send Octel 50, Feature access code, Index number, mailbox number,
calling number.
Program the dial string for bin 600 as follows:
221*98*6*9
Ç
