Mitel SX200D ONS (77135)
C o n f i d e n t i a l
2
The above information is provided by Lucent Technologies as a guide.
See disclaimer on page 1
Lucent Technologies
O c t e l M e s s a g i n g D i v i s i o n
2.0 ODERING
INFORMATION
This integration supports up to 16 Octel 50 ports.
Dialogic and Brooktrout kit versions of this product are available
depending on the application.
For existing systems with greater then 16 ports please consult with your
sales representative.
3.0
SX200D HARDWARE REQUIREMENTS
•
ONS Line Card (12 port) 9109-010-000
3.1
SX200D SOFTWARE REQUIREMENTS
•
Generic 1004, 1005
•
ACD Decryption Module
•
Mitel Mail Enhanced Inband Signaling.
3.2
ADDITIONAL MATERIAL REQUIREMENTS
•
A Personal Computer with a millennium-compliant version of DOS
is required to support the messaging system hardware and software.
Chapter 2 of the Installation Guide provides minimum hardware
requirements for identifying this item.
•
When using the DIALOG/4 ™ you will need:
–
One RJ-14 jack with 4-conductor line cord for every two Octel 50
ports
•
If FaxMail is installed.
–
One analog line per Tr112™ port.
–
Two RJ-11 Jacks with 4-conductor line cord for every Brooktrout 2
port TR112™ board.
•
For optional remote service pack, request up to, two analog lines for
remote service access. In addition order one RJ-11 Jacks and 2-
conductor modular telephone cords for each line.
–
One for access Octel 50
This integration will support 16
ports.
Mitel Hardware Requirements
Mitel Software Requirements
Additional Material Requirements
