Preparing for Installation
Selecting the installation site
MAX TNT Hardware Installation Guide
2-3
Selecting the installation site
Before you choose a setup location for a MAX TNT unit, read and follow the site and electrical
requirements defined in Appendix C, “Safety-Related Electrical, Physical, and Environmental
Information.”
Select the setup location carefully. Keep in mind that the unit requires proper ventilation and
space for current and future cabling requirements. You can rack-mount a MAX TNT unit in a
standard equipment cabinet with a width of 19 or 23 inches (48.26cm or 58.42cm), or place it
on a flat surface as a free-standing unit. For more information see Appendix C,
“Safety-Related Electrical, Physical, and Environmental Information.”
Required installation tools and equipment
To install MAX TNT hardware, you need the following tools and equipment:
•
RS-232 straight-through modem cable for connecting a PC or workstation to the unit
•
Antistatic wrist strap and mats
•
Number 2 Phillips screwdriver
•
1/8-inch standard screwdriver
•
3/16-inch standard screwdriver
•
3/8-inch socket wrench
•
(Recommended) Mechanical lift
