11 To remove the 10-Button HFAI Voice Terminal from the desk stand,
set the handset aside, turn the voice terminal upside down, and
unplug the modular voice terminal cord. Press down on the locking
tab to release the stand, and slide the stand down and away from the
voice terminal.
WALL MOUNT ASSEMBLY
Installing the Wall Mount
1
2
3
4
Break the pieces of the desk stand/wall mount away from the runner.
Discard the runner.
Find the pieces labeled Base and Wall Support, and file the rough
edges off these pieces where they were attached to the runner.
Use the tip of a screwdriver or other similar device to remove the four
rubber feet in the corners on the bottom of the base.
Place the base upside down on a table or desk and insert the tabs
labeled A and B on the wall support into the slots labeled A and B on
the base (Figure 7).
Tab B
Tab A
Bottom of base
FIGURE 7 Assembling the Wall Mount
Lift the base and push the wall support through the slots until it clicks
into place. Turn the base over.
5
iss 3, cib3023-5
