6
7
Select a mounting space at least as large as the voice terminal. Use
the base as a template and mark the four mounting screw locations
on the wall.
Unpack the hardware kit, which was ordered separately from the
voice terminal. Select the proper-sized toggle bolts for your wall
thickness.
●
For walls 3/8” to 1/2” thick, use the smaller of the two sizes of
toggle bolts.
●
For walls 5/8” to 3/4” thick, use the larger of the two sizes.
●
For solid walls, either of the two sizes may be used.
8
9
10
Using a 5/16” drill bit, drill a hole at each of the four previously
marked mounting screw locations on the wall.
Insert one toggle bolt into each of the four drilled holes (Figure 8A).
Gently tap each toggle bolt with a hammer until it is flush with the wall
(Figure 8B).
Insert the red key (provided with the hardware kit) into the toggle bolt,
and push with your fingertip (do not force or hammer the red key) to
pop open the toggle inside the wall (Figure 8C). Remove the red
key.
Red key
A
B
C
FIGURE 8 Installing Toggles for Wall Mount
11
12
Using a 3/16” drill bit, enlarge the four mounting screw holes in the
base.
Line up the holes in the base with the toggle bolts.
iss 3, cib3023-6
