LTS LTN8932-R Скачать руководство пользователя

Страница: 7 / 203

User Manual of 89XX-R Series NVR

Product Key Features

General

Connectable to network cameras, network dome and encoders.

Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,

PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF or PSIA

protocol.

Connectable to the smart IP cameras.

H.265/H.264/MPEG4 video formats

PAL/NTSC adaptive video inputs.

Each channel supports dual-stream.

Up to 8/16/32/64 network cameras can be added according to different models.

Independent configuration for each channel, including resolution, frame rate, bit rate, image quality,

etc.

The quality of the input and output record is configurable.

Local Monitoring

HDMI/VGA1 and HDMI2/VGA2 outputs provided

HDMI Video output at up to 4K resolution and VGA video output at up to 2K resolution.

Multiple screen display in live view is supported, and the display sequence of channels is adjustable.

Live view screen can be switched in group. Manual switch and auto-switch are provided and the

auto-switch interval is configurable.

Quick setting menu is provided for live view.

Motion detection, video tampering, video exception alert and video loss alert functions.

Privacy mask.

Multiple PTZ protocols supported; PTZ preset, patrol and pattern.

Zooming in by clicking the mouse and PTZ tracing by dragging mouse.

HDD Management

8 SATA hard disks and 1 eSATA disk can be connected for 89XX-R Series

Up to 6TB storage capacity for each disk supported.

Supports 8 network disks (NAS/IP SAN disk).

Supports S.M.A.R.T. and bad sector detection.

HDD group management.

Supports HDD standby function.

HDD property: redundancy, read-only, read/write (R/W).

HDD quota management; different capacity can be assigned to different channel.

RAID0, RAID1, RAID5, RAID6 and RAID 10 are supported.

Hot-swappable RAID storage scheme, and can be enabled and disabled on your demand. And 16 arrays

can be configured.

89XX-R series NVR support disk clone to the eSATA disk.

Recording Capture and Playback

Holiday recording schedule configuration.

Continuous and event video recording parameters.

Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm and VCA.

8 recording time periods with separated recording types.

Содержание LTN8932-R












































































































































































































Результаты поиска

Содержание LTN8932-R

Отзывы:

Похожие инструкции для LTN8932-R

Бренды по названию

Популярные бренды

LTS LTN8932-R, Руководство пользователя

Результаты поиска

Содержание LTN8932-R

Отзывы:

Похожие инструкции для LTN8932-R

Бренды по названию

Популярные бренды