LTS LTN8932-R Скачать руководство пользователя

Страница: 203 / 203

User Manual of 89XX-R Series NVR

202

Reduce the number of local playback channel.

Select “Menu > Playback”, and uncheck the checkbox of unnecessary channels.

Check if the fault is solved by the above steps.

If it is solved, finish the process.

If not, please contact the engineer from our company to do the further process.

No record file found in the NVR local HDD, and prompt “No record file found”.

Possible Reasons:

The time setting of system is incorrect.

The search condition is incorrect.

The HDD is error or not detected.

Steps:

Verify the system time setting is correct.

Select “Menu > Configuration > General > General”, and verify the “Device Time” is correct.

Verify the search condition is correct.

Select “Playback”, and verify the channel and time are correct.

Verify the HDD status is normal.

Select “Menu > HDD > General” to view the HDD status, and verify the HDD is detected and can be read
and written normally.

Check if the fault is solved by the above steps.

If it is solved, finish the process.

If not, please contact the engineer from our company to do the further process.

Содержание LTN8932-R












































































































































































































Результаты поиска

Содержание LTN8932-R

Отзывы:

Похожие инструкции для LTN8932-R

Бренды по названию

Популярные бренды

LTS LTN8932-R, Руководство пользователя

Результаты поиска

Содержание LTN8932-R

Отзывы:

Похожие инструкции для LTN8932-R

Бренды по названию

Популярные бренды