LTS LTN8932-R Скачать руководство пользователя

Страница: 130 / 203

User Manual of 89XX-R Series NVR

129

The NVR supports the VCA detection alarm (

line crossing detection

and

intrusion detection, people gathering

detection, fast moving detection, parking detection, unattended baggage detection, object removal detection,

audio loss exception detection, sudden change of sound intensity detection,

and

defocus detection

) sent by IP

camera. The VCA detection must be enabled and configured on the IP camera settings interface first.

All VCA detection must be supported by the connected IP camera.

Please refer to the User Manual of Network Camera for the detailed instructions for the all VCA detection

types.

9.1

Line Crossing Detection

Purpose:

This function can be used for detecting people, vehicles and objects cross a set virtual line. The line crossing

direction can be set as bidirectional, from left to right or from right to left. And you can set the duration for the

alarm response actions, such as full screen monitoring, audible warning, etc.

Steps:

Enter the VCA settings interface.

Menu> Camera> VCA

Select the camera to configure the VCA.

You can click the checkbox of

Save VCA Picture

to save the captured pictures of VCA detection.

Select the VCA detection type to

Line Crossing Detection

Check the

Enable

checkbox to enable this function.

Click

to configure the trigger channel, arming schedule and linkage actions for the line crossing

detection alarm.

Click the

Rule Settings

button to set the line crossing detection rules.

Select the direction to A<->B, A->B or A<-B.

A<->B

: Only the arrow on the B side shows; when an object going across the configured line with both

direction can be detected and alarms are triggered.

A->B

: Only the object crossing the configured line from the A side to the B side can be detected.

B->A

: Only the object crossing the configured line from the B side to the A side can be detected.

Click-and-drag the slider to set the detection sensitivity.

Sensitivity:

Range [1-100]. The higher the value is, the more easily the detection alarm can be

triggered.

Click-

to save the rule settings and back to the line crossing detection settings interface.

Содержание LTN8932-R












































































































































































































Результаты поиска

Содержание LTN8932-R

Отзывы:

Похожие инструкции для LTN8932-R

Бренды по названию

Популярные бренды

LTS LTN8932-R, Руководство пользователя

Результаты поиска

Содержание LTN8932-R

Отзывы:

Похожие инструкции для LTN8932-R

Бренды по названию

Популярные бренды