LT HYDRA Plus, Руководство пользователя

Страница: 44 / 258

5-12
&
EDITOR
HYDRA PLUS – LT LIGHT
has 1 step, this command decreases the parameter a %.
In the command
{spots} PARAM # @ #´
, when
@
is pressed, the system
shows us a red window with the values of the parameter to select the desired
value easily. The selection can be done using the external mouse.
Remember : The
#’
value is always entered in 2 digits.
Example: Select the parameter 5 (
Color1
) of the spot 1 and set it at
BLUE
pressing
SPOT 1 PARAM 5 @ 06
DIMMER
The
dimmer
of the selected spots
{spots}
can be edited pressing:
{spots} JS
ô
Manually, moving the joystick in vertical direction.
{spots} @ # #
Directly, assigning a numeric level entered in 2 digits (
00
to
99
)
{spots} @ @
Directly at 100% (
FF
)
{spots} CALL
At 100% (
FF
) with a fading of 2 seconds.
{spots} +%
Increasing the level a 5%
{spots} -%
Decreasing the level a 5%
{spots} @
•
Assigning a level as the last numeric level used.
The
Dimmer
is the default parameter, since it’s not necessary to select it to edit it. Even so can
be selected and edited as the rest of the parameters. Example:
SPOT 1 PARAM 1 @@
that is the same that
SPOT 1 @@
EDITION IN THE CONTROL WHEELS
Moving
R1
,
R2
or
R3
, the parameters in active bank are edited. To change the active bank to
control other parameters, it’s possible use one of these options:
•
Press à to access to the next 3 parameters.
• Press
ß
to access to the previous 3 parameters.
•
Press
POS
,
COL
, etc. to access to the first parameter of position, color, etc. respectively.
•
Select the parameter to control in
R1
pressing
{spots} PARAM # SELECT