LT HYDRA Plus, Руководство пользователя

Страница: 113 / 258

THE EFFECTS
&
9-11
HYDRA PLUS – LT LIGHT
# STEP q Mn
# STEP
If the effect is deactivated, when you press
# STEP q Mn
:
The effect is activated in step-to-step mode. The step
#
and the base memory are
activated without fade-time. This step stays active until the user presses
Mn
(or
STEP q Mn
).
If the effect is active, when you press
# STEP q Mn
:
The effect changes to step-to-step mode. The step
#
is activated and it stays active.
#
is step number, (
1
to
999
).
A channels, scroller & spot parameter controlled by an effect, appears in yellow in the monitor
(scene screens).
Notes:
The effects loaded are stored in the master pages.
The
Flash
doesn’t affect to the
Mn
of the effects.
LEARN TIME FUNCTION -
LNTM
Learn the
StepT
for an effect:
It is possible to learn the step time (
StepT
) of an effect, its rhythm.
Load the effect in the desired masters (
EFFECT 1 LOAD Mn
) and then:
•
Press
LNTM
(its LED at ON).
•
Press
Mn
•
Press
Mn
. In this moment:
The effect toggle to auto mode, using the learned
StepT
. El learned
StepT
is the time that
passes between
Mn
&
Mn
.
LNTM
is deactivated (its LED at OFF).
In the right of the status line,
L-T ###
appears in a red filed, when the
LNTM
is active.
Where
# # #
is the time (in seconds) that this function is learning.
THE SCROLLERS & SPOTS IN THE EFFECTS
When an effect has a scroller or spot parameter (except
Dimmer
) in some of its steps:
1. The effect level doesn’t affect to the value of the scroller or parameter. The scroller or
parameter puts its value in scene inclusively if the level is 0%.
2. Each time that a step is deactivated, its scrollers and parameters remain their values in scene
(
tracking
). Only other step (or playback) can change this scene value.
3. The effect takes control of the
LTPs
in scene when it is activated (
GO
), but not with each
new step.