Safety Instruction
Before using the product, please read and follow the instructions of this manual
carefully, and refer to relevant national and international safety regulations.
∆
Attention
Please do not disassemble or modify the Lidar privately. If you need special
instructions, please consult the technical support staff of LSLiDAR.
∆
Laser Safety Level
The laser safety of this product meets the following standards:
● IEC 60825-1:2014
● 21 CFR 1040.10 and 1040.11 standards, except for the deviations (IEC 60825-
1, third edition) stated in the Laser Notice No. 56 issued on May 8, 2019. Please
do not look directly at the transmitting laser through magnifying devices (such
as microscope, head-mounted magnifying glass, or other forms of magnifying
glasses).
Eye Safety
The product design complies with Class 1 human eye safety standards. However,
to maximize self-protection, please avoid looking directly at running products.
∆
Safety Warning
In any case, if the product is suspected to have malfunctioned or been damaged,
please stop using it immediately to avoid injury or further product damage.
Housing
The product contains high-speed rotating parts, please do not operate unless
the housing is fastened. Do not use a product with damaged housing in case of
irreparable losses. To avoid product performance degradation, please do not
touch the photomask with your hands.
Operation
This product is composed of metal and plastic, which contains precise circuit
electronic components and optical devices. Improper operations such as high
temperature, drop, puncture or squeeze may cause irreversible damage to the
product.
Power Supply
Please use the connecting cable and matching connectors provided by LeiShen
