————————————————
Accessories from
—
The Original
——
Rev. 01 15/08/2011
Page 4 of 4
Additional instructions for
K1300S
Artikel-Nr. :
120B028
Produkt :
Superbike conversion kit
Modell :
BMW K1300S 2009
Typ :
K12S
Brake- and clutch-hoses:
Route both hoses as shown behind the ignition lock and fix them
(where the hoses intersect, see
) with a cable tie.
Handlebar control harness:
Dismantle both cables at their junction and shorten the leading
duct by about 2cm. Spread the branching of the cables apart and re-seal it with tape.
Make sure that no cable, hose or harness is bended and stays tension-free over the
whole steering angle.
The Superbike Conversion kit is now installed correctly.
We, the team of LSL Motorradtechnik Germany, wish you enjoyable driving!