————————————————
Accessories from
—
The Original
——
Rev. 01 15/08/2011
Page 3 of 4
Installation notes for wires, cables and hoses:
Throttle cable:
Route the
throttle cable, as shown, right
outside of the plastic frame.
Secure the cable for a safe
guidance with cable ties at
the shown location.
Therefore, you have to drill
two horizontal holes into the
plastic frame. Check throttle
cable for free movement on
every steering angle.
Attention: The following notes are only valid for the model K1200S,
for the model K1300S please note the next sheet.
Brake and Clutch hoses:
Install as defined original.
Handlebar Control harness:
Install as defined original.
Make sure that no cable, hose or harness is bended and stays tension-free over the
whole steering angle.
The Superbike Conversion kit is now installed correctly.
We, the team of LSL Motorradtechnik Germany, wish you enjoyable driving!