LSIS XGB Series, Руководство пользователя

Страница: 421 / 618

Chapter 11 RTD Input Option Board (XBO-RD01A)
(1) Run channel setting (address 0)
(a) You can enable/disable the RTD input option board
(b) If Run channel is not specified, all channels will be stop status.
(c) When using Put instruction, Channel Status address is as follows
bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8 bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
- - -
C
H
0
- - - - - -
Address0
Enable CH
Bit On (1): enable
Bit Off (0): disable
- - - - - -
(d) Vales set in B1 ~ B15 are ignored.
(e) This area shows the same results with “Channel status” in I/O parameter setting window.
(2) Sensor type setting (address 1)
(a) Sets sensor type with the following code.
Word Sensor type
0 PT100
1 JPT100
(b) When input value is larger than 2, 0 (PT100 type) is selected by force.
(c) In case of using PUT instruction, Sensor Type Setting Area is as follows.
bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8 bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
Ch0 sensor type setting
Address1
Sensor type setting
0: PT100
1: JPT 100
(3) Setting temperature display unit (address 5)
(a) Sets temp. display unit with the following code.
Bit Temp. display unit
0 Celsius
1 Fahrenheit
(b) When input value is larger than 2, 0 (Celsius) is selected by force.
(c) In case of using PUT instruction, Output Data Type Area is as follows.
bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8 bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
- - -
C
H
0
- - - - - -
Address5
Temp. unit setting
Bit Off(0): Celsius
Bit On(1): Fahrenheit
- - - - - -
11 - 23