LS tractor MT2 25S, Руководство оператора, Страница: 78 / 187

3 - 22
Fast
Slow & Lock
Down speed control knob
②
Down speed control knob

It is use to adjust the down speed of the 3-point
linkage. Turn the knob to the right direction in
order to lower the implement slower, and to the
left direction for faster down speed.

If turning the knob right direction fully, the
implement shall be fixed and even if lowering
down the position control lever, the implement
does not let down.
- Tiller : Slow in down speed
- Plough : Fast in down speed

When working in hard ground, slow down the
down speed to avoid the bounding of the
implement.
▶
When driving on the road, replacing tiller blades or removing grass around the tiller
blades, turn the down-speed control knob clockwise slightly to lock.
▶
The knob rotates about two revolutions. Do not over-tighten the knob. It may cause
damage to the control valve and connection parts.
Warning
(4) Mid mower height adjustment knob (If fitted)

This is used to adjust the height of the mid
mower while working.

At first, lift up the rear 3-point linkage and mid
mower.

If rotating the knob counter-clockwise, the height
of the mid mower will be lowered, and otherwise,
the height will be lifted. The height will be
adjusted by several steps from “ 0 ” to “ H ”.

When rotating the knob, refer to the numbers or
marks on top of the knob indicated by an
instructional decal to estimate the height of the
mid mower.

Lower down the rear 3-point linkage and mid
mower.
Low
High
Mid mower height adjustment knob
▶
Do not try to turn the mid
mower height adjustment knob
clockwise without lifting the
position control lever.
Notice
Mid mower height adjustment knob
Instructional decal