LS tractor MT2 25S, Руководство оператора

Страница: 106 / 187

4 - 26
▶
When adjusting the wheel track, pay attention to the direction of tire lugs. If it
shows “/\” shape when looked behind, it is correct.
▶
Actual settings may vary depending on the brand of the rim and type of tire.
Notice
▶
The tractor wheels are very heavy. PLEASE BE CAREFUL.
▶
When removing the wheels, proceed with extreme caution, use a suitable hoist and
specific equipment to move the heavy parts.
Warning
(6) Adjusting Wheel tracks and Tire replacement
②
Rear wheel

When changing the rear wheels, check the radial
and lateral clearance between rear tire and
tractor chassis as below.
- A : 15mm (0.6 in) (Minimum)
- B : 30mm (1.2 in) (Minimum)
“A”
“B”
FENDER
①
Front wheel

The rim and disk assembly of the front wheel is not adjustable type.

If the front wheels are replaced, check the clearances between tires and tractor body case by case.
If necessary, the steering angle must be adjusted. (See chapter 4-5-(8) in this manual.)
③
Standard track

Standard wheel track for this model as below.
(when applying front tires: 23x8.50-12, rear tires:
12-16.5)
- Front wheel track: 915mm
- Rear wheel track: 930mm