Transmitter/Keypad Elements
Power-Reset Button:
Used to reset pagers before reprogramming.
Dry-Erase Server Board:
Write the staff names on the label next to their pager number with a NON-PERMANENT, Dry-Erase
Marker or grease pencil.
Keypad Functions
Before using the keypad, read the following key descriptions:
Function Keys:
The function keys are located on the last row of the transmitter keypad.
PROG
– Used when altering system settings, functions, and programming pagers
PGR
– Used when entering pager numbers above 16
CLR
– Used to clear an entry
ENT
– Used to enter changes to system settings, functions, and to send a page
Vibration Keys
V1, V2 and V3 select the number of vibrations a pager will respond with. This button is pressed be-
fore paging a pager. Sends message 1, 2 or 3 to Alpha pagers.
Number Keys:
Number keys 1 through 16 are “one touch” keys to instantly page pagers 1 – 16. Number 10 is also
0 when programming or paging pagers numbered above 16.
Long Range Systems
8
T9601 User Manual
