Setup All Call
‘All Call’ sends a page to all pagers at once. When ‘All Call’ is enabled, pressing the number “16” on the key-
pad will perform this function.
To enable:
1. Press PROG
2. Enter 9 - 3 - 5
3. Press ENT
To disable:
1. Press PROG
2. Enter 9 - 3 - 4
3. Press ENT
Station ID
When more than one transmitter is being used on the same System ID, a station ID can be set to identify
which transmitter the page came from. The station ID will display when a page is sent.
To set:
1. Press PROG
2. Enter 9 - 6 - # (# = Station ID: 1 – 9)
3. Press ENT
System ID
The system ID is used to keep neighboring paging systems from interfering with each other. This setting
should only be cahnges at the advice of an LRS custmer support representative.
To change the ID:
1. Press PROG
2. Enter 9 - # - # (# = System ID: 00 – 19) (EX: 9 – 0 – 3, System ID = 3)
3. Press ENT
Set Simultaneous Manager Paging
This feature allows the manager to receive a message anytime a server is paged.
NOTE:
This function works with LRS Alpha pagers only.
To turn on:
1. Press PROG
2. Enter 9 - 5 - 1
3. Press ENT
4. LCD screen on transmitter will display On
Long Range Systems
11
T9601 User Manual
