System Settings
Setting the Vibration Mode
NOTE:
The factory default setting for vibration mode is 1 vibration. (EX: When a page is sent from
the transmitter, the pager will vibrate once)
To set the vibration mode:
1. Press PROG
2. Enter 9 - 2 - #
• 1 vibration: # = 1
• 2 vibrations: # = 2
• 3 vibrations: # = 3
3. Press ENT
Set the Vibration Strength (Only Appicable to the SP5)
The strength of a pager’s vibration when paged can be set.
To adjust the vibration level, between 0 (minimum) and 9 (maximum):
1. Press PROG
2. Enter 9 - 4 - # (# = 0 – 9)
3. Press ENT
• No vibration: # = 0
• Mid level vibration: # = 5
• Maximum vibration: # = 9
System Reset
In certian situations the T9601 may require a system reset before operating properly. When the system is
reset, the Restaurant ID (see pg. 11) and vibration mode (see pg. 10) will be set to factory default.
To reset the transmitter to factory default:
1. Press PROG
2. Enter 0-0-0 and press ENTER
Long Range Systems
10
T9601 User Manual
