
P a g e 33 | 36
LPS-Lasersysteme Siegmund Ruff / CEO Haidschwaerze 18 72131 Ofterdingen Germany
Phone: +49 7473 271177 www.lps-laser.de [email protected]
-
Due to inadequate cleaning of the fan and heatsink, overheating and electronic defects can
occur. Therefore, regular maintenance is necessary.
-
By its completely closed optic area a pollution is hardly possible but it is still not excluded.
Therefore, it should be checked during the regular cleaning of the electronics range
whether and how dirty the optic area is.
-
For cleaning the electronic area, please remove the front and the back plate of the laser
system and remove all dust particles.
-
For cleaning the optic and laser area, please remove the cover and the front of the laser
system.
-
For cleaning only manufacturer's recommended products should be usesd because wrong
cleaning agents can damage the components.
With this laser system there is a contamination hardly possible because of the closed optical area.
Nevertheless you can’t expulse one. For this reason you should always prove how contaminated the
optical area is during the clarification.
For clarification please remove the front and back side of the laser system and all the dust particles.
For cleaning the optical area please remove the back and front side as well as the lid of the system.
Use only cleaning agents recommended by the manufacturer because the wrong cleaning agents can
cause a damage of the components.