P a g e 30 | 36
LPS-Lasersysteme Siegmund Ruff / CEO Haidschwaerze 18 72131 Ofterdingen Germany
Phone: +49 7473 271177 www.lps-laser.de [email protected]
9.2
Activation of PRG ILD list mode
1.
Make sure that the delivered SD card is inserted in the laser system.
2.
Switch on the laser system.
3.
Press the menu encoder 2 seconds long.
4.
Select the point MODE in the main menu.
5.
Select the mode “PRG ILD List”.
6.
Scroll down and select “Exit” to leave the menu.
7.
Open a list folder via the menu encoder and then one of these lists.
9.3
Create a PRG list at the laser system
1.
Set the laser system on “ILD show mode”.
2.
Select an animation which you would like to add to the list.
3.
Press the menu encoder.
4.
Select the number of repetitions of the animation in the list.
5.
Confirm the question "Added to the list?" with "yes”, then select by question "To empty the list?"
"No".
6.
Proceed to point 2.
9.4
Describe the SD card with own animations
Basically:
-
The SD card must be formatted in the FAT32 file system.
-
File and folder names may not be longer than 8 digits.
-
Only standard characters (letters and numbers) and underlines are allowed.
-
Individual animations must be in the .ild format.
-
Animation programs must be in the .prg format.
-
Each folder must contain a .prg file with the same name.
-
The category name matches the folder name.