LPKF S104 страница 35 Скачать руководство пользователя

Страница: 35 / 54

ProtoMat S64/S104

First startup

V. 1.0 | LPKF Laser & Electronics AG

35/54

5 First startup

This chapter contains important information on first startup of the system.

5.1 Safety

Observe the following safety instructions for the first startup of the system:

WARNING

Accident hazard due to insufficiently qualified personnel!

Insufficiently qualified personnel cannot assess the risks of using the system and

put themselves and others in danger.



Allow only qualified personnel to use the system.



Keep insufficiently qualified personnel out of the working area.

CAUTION

Tripping hazard by hoses and cables!

Hoses and cables are routed to the system. If the hoses and cables are laid

inappropriately they pose a tripping hazard for the operating personnel.



Always ensure that the hoses and cables do not pose a tripping hazard.

NOTICE

Property damage by moisture during transport/storage!

When transporting or storing the system, moisture can cause damage to the

system.



Ensure that there is no moisture in the system.



Before first startup of the system wait approx. 24 hours to allow the system to

acclimatize.

5.2 Requirements of the place of installation

Before installing the system, the following requirements of the place of installation

have to be ensured.

5.2.1 Climatic conditions

The following climatic conditions have to be ensured for operating the system:

Climatic conditions

Data

Value

Unit

Temperature range (operation)

20 to 25 (68 to 77)

°C (°F)

Temperature range (storage, transport)

-10 to 40 (14 to 104)

°C (°F)

Max. humidity, non-condensing

Содержание S104























































Результаты поиска

Содержание S104

Отзывы:

Похожие инструкции для S104

Бренды по названию

Популярные бренды

LPKF S104, Руководство пользователя

Результаты поиска

Содержание S104

Отзывы:

Похожие инструкции для S104

Бренды по названию

Популярные бренды