LPKF S104, Руководство пользователя

Страница: 33 / 54

ProtoMat S64/S104 Transport and storage
V. 1.0 | LPKF Laser & Electronics AG 33/54

Removing the transport lock
1. Remove the foam pad beneath the processing head.
Fig. 17: Transport lock
2. Store the foam pad in the box for a possible transport of the system.

The transport lock has been removed.
4.3 Transporting the system
This chapter describes the transport over short distances and the preparations for a
transport over long distances.

Preparing the system for transport
Ensure that the following prerequisites are fulfilled before performing the described
tasks:
Prerequisites Spare parts and auxiliaries
 Safety shoes
 Protective gloves
 The collet is equipped with a tool.
 Unpacking instructions
1. Switch off the system before transport.
Ensure that a tool is in the collet or a tool is in the tool magazine before switching off
the system.
2. Disconnect all connections of the system (for an overview of the connections refer
to page 39.
3. Install the transport lock beneath the processing head.
4. For transport over longer distances, pack the system in its original packaging.
For transport over short distances, the transport lock does not have to be installed
and the system does not have to be packed.

The system has been prepared for transport.