LPKF S104, Руководство пользователя

Страница: 16 / 54

System description ProtoMat S64/S104
16/54 LPKF Laser & Electronics AG | V. 1.0
3 System description
The ProtoMat S64/S104 is a circuit board plotter for structuring single-layer and multi-
layer circuit boards. The tool magazine can accommodate up to 20 different drilling
and milling tools (ProtoMat S104 only, 15 tools for ProtoMat S64) that can realize
among others the following applications:
 Processing of single-sided and double-sided circuit boards
 Processing of multi-layer PCBs
 Routing flexible and rigid-flex PCBs
 Processing of solder stop films
 Processing of SMD solder paste stencils
 Engraving of signs or housing panels
 Drilling of plane materials using drilling tools
 Milling of cut-outs and contour routing
 Processing 3D objects of up to 10 mm (~0.4 in) in height
 Applying solder paste with an integrated dispenser
 Processing of ceramic-filled base material
 Processing RF circuits (only ProtoMatS104 with corresponding RF tools)
The system is delivered with the user-friendly CircuitPro PM system software. The
software allows importing the following data formats: CAM, Excellon, Gerber,
GerberX, LMD, HPGL, DXF, Step, Iges, Sieb & Meyer, and ODB++
The data are prepared by CircuitPro PM and the toolpaths are computed
automatically. The tools required for your project are predetermined and are picked up
and adjusted automatically during processing:
 Isolation distances of 0.2 mm to 0.5 mm are produced using a Universal Cutter,
smaller isolation distances of 0.1 mm to 0.15 mm using a Micro Cutter.
 Cylindrical tools with diameters of 0.8 mm - 3 mm are available for producing wide
isolation distances and rub-outs.
 The drilling tools of 0.2 mm to 2.4 mm are used for drilling through the PCBs.
 Contour routing tools are available for cutting out PCBs and for producing drill
holes > 2.4 mm.
The system is connected to the PC via a USB 2.0 interface. In preparation of the
process the material to be processed is placed. For this, the system has a vacuum
table with a processing area of (W x H x D) 330.5 × 249 × 8 mm (~13.0 × 9.8 × 0.3 in).
Once the data and the system are prepared the process is started and runs fully
automatically. A stack light (optionally available) indicates the status of the system at
any time of the process.
Further characteristics of the system are:
 Milling spindle with a rotation speed of 60 000 rpm (ProtoMat S64) or 100 000 rpm
(ProtoMat S104).
 Integrated camera for recognizing fiducials to enable processing multilayer PCBs.
 Processing depth limiter that enables processing substrates with sensitive
surfaces
 Copper thickness measurement to determine the copper layer on your base
material (ProtoMat S104 only).
 Automatic control of the extraction system for switching on and off.