Lowrance HDS Gen3 Polaris, Руководство по установке

Страница: 29 / 44

| 27
Software setup | HDS Gen3 Polaris Installation Manual
The HDS Gen3 Polaris to which connection is attempted will raise a
prompt.
Select
Yes
for one-time connection, or
Always
if device is to be
remembered for regular connection. This setting can be changed
later if required.
¼
Note: The HDS Gen3 Polaris internal wireless module only supports
GoFree connection to its own display. Other displays connected via
ethernet are not visible.
¼
Note: If it’s required to show all displays available for control/viewing
via one wireless connection, use the external WIFI-1 module.
Connect to a wireless hotspot
Displays the Wireless device dialog that you can use to connect the
wireless functionality to a wireless hotspot.
Remote controllers
When a wifi device is connected, it should appear in the
Remote
controllers
list.