Lowrance HDS Gen3 Polaris, Руководство по установке

Страница: 16 / 44

14 |
Wiring | HDS Gen3 Polaris Installation Manual
Power connection
The plug of the supplied power cable has two discrete cables
exiting from it. The thickest of the two cables provides the following:
•
power into the system (Red and Black wires)
•
remote turn-on for certain Navico expansion modules (Yellow wire)
1
+
_
3
2
4
5
6
1 HDS-7 Gen3 Polaris display rear
2 Power cable
3 12 V positive wire (red) shown with fuse holder installed
inline
4 12 V negative wire (black)
5 Accessory Wake Up wire (yellow)
6 12 V DC supply
Accessory wake up
The yellow colored accessory wake up line may be used to control
the power state of Navico modules such as SonicHub or WM-3
SiriusXM weather receiver. This means that the modules are
turned on the moment the display is powered up. For connection,
simply combine all yellow wires on a common bus or to a single
termination point.