manualshive.com logo in svg

Lowrance GlobalMap 4000M, Руководство по эксплуатации

Поделиться
Скачать
Lowrance GlobalMap 4000M Скачать руководство пользователя страница 6

iv

Trail Update Rate (Time, Distance) ................................... 94

Delete Trail ............................................................................. 95
New Trail................................................................................. 95
Trail Visible/Invisible and Other Trail Options .................... 95

Units of Measure......................................................................... 95

Section 6: Searching ............................................................... 97

Find Addresses............................................................................ 97
Find Any Item Selected by Map Cursor .................................. 100
Find Interstate Highway Exits ................................................ 101
Find Map Places or Points of Interest (POI) ........................... 103
Find Streets or Intersections.................................................... 105
Find Waypoints ......................................................................... 109

Section 7: Supplemental Material ..................................... 111
Index......................................................................................... 117

WARNING!

A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD
TO OBTAIN POSITION INFORMATION.

CAUTION

When showing navigation data to a position (waypoint), a GPS unit will show
the shortest, most direct path to the waypoint. It provides navigation data to the
waypoint regardless of obstructions. Therefore, the prudent navigator will not
only take advantage of all available navigation tools when traveling to a way-
point, but will also visually check to make sure a clear, safe path to the waypoint
is always available.

WARNING!

When a GPS unit is used in a vehicle, the vehicle operator is solely re-
sponsible for operating the vehicle in a safe manner. Vehicle operators
must maintain full surveillance of all pertinent driving, boating or fly-
ing conditions at all times. An accident or collision resulting in damage
to property, personal injury or death could occur if the operator of a
GPS-equipped vehicle fails to pay full attention to travel conditions and
vehicle operation while the vehicle is in motion.

Содержание GlobalMap 4000M





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды