manualshive.com logo in svg

Lowrance GlobalMap 4000M, Руководство по эксплуатации

Поделиться
Скачать
Lowrance GlobalMap 4000M Скачать руководство пользователя страница 27

21

Memory card compartment with a 16 MB MMC card installed.

To remove an MMC

1. Open the card compartment door by unscrewing the thumb screw.
The screw should only be finger tight. If it was over-tightened, use a
thumbnail, a coin or a screwdriver to open the door.

2. Just press a finger against the label of the MMC and drag it from the
slot.

3. Close the compartment door and fasten the thumb screw finger tight.

To add an MMC or SD Card

1. Open the card compartment door.

2. Grasp the bottom of the MMC and push the top of the card into the
slot. Once the card is started, use your fingernails to slide it the rest of
the way to the left, until it is firmly seated in the slot.

3. Close the compartment door and fasten the thumb screw finger tight.

Other Accessories

Other accessories include MMC cards, MMC card readers and MapCre-
ate™ 6 custom mapping software for your computer. MMC card readers
are available in USB and parallel port versions.

If these accessories are not available from your dealer, see the acces-
sory ordering information on the inside back cover of this manual.

Insert card face up,

this way

Thumb

screw

Содержание GlobalMap 4000M





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды