Lowrance ELITE TI, Руководство оператора

Страница: 22 / 130

By default, the cursor is not shown on the panel.
Position the cursor by tapping the desired location on the screen.
When the cursor is active, the cursor position window is displayed.
To remove the cursor and cursor elements from the panel, select
the
Clear cursor
option.
GoTo cursor
You can navigate to a selected position on the image by positioning
the cursor on the panel, then using the
Goto Cursor
option in the
menu.
The Cursor assist function
The cursor assist function allows for fine tuning and precision
placement of the cursor without covering details with your finger.
Press and hold your finger on the screen to switch the cursor
symbol to a selection circle, appearing above your finger.
Without removing your finger from the screen, drag the selection
circle over the desired item to display item information.
When you remove your finger from the screen the cursor reverts to
normal cursor operation.
Measuring distance
The cursor can be used to measure the distance between your
vessel and a selected position, or between 2 points on the chart
panel.
1.
Position the cursor on the point from where you want to
measure the distance. Start the measure function from the
menu
22
Basic operation | ELITE Ti Operator Manual